Руководство По Работе для Brother Innov-is 40e
UTILITY STITCHES ————————————————————————————————————————————————————————————————————
82
Heirloom stitching
When sewing with the wing needle, the needle holes
are enlarged, creating a lace-like decorative stitch.
This is used to decorate hems and tablecloths on thin
or medium weight fabrics in addition to plain weave
fabrics.
are enlarged, creating a lace-like decorative stitch.
This is used to decorate hems and tablecloths on thin
or medium weight fabrics in addition to plain weave
fabrics.
a
Insert the wing needle.
• Use a 130/705H 100/16 wing needle.
• For details on inserting a needle, refer to
• For details on inserting a needle, refer to
“Replacing the needle” (page 29).
b
Turn on the machine.
c
Select
stitch , , , ,
or .
d
Attach monogramming foot “N”.
e
Start sewing.
■ Drawnwork (Example 1)
The fabric is turned and sewn twice.
a
Pull out several threads from the fabric.
b
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 31).
c
Select stitch
.
• For details, refer to “Selecting a stitch”
(page 40).
CAUTION
● The needle threader cannot be used with the
wing needle, otherwise the sewing machine
may be damaged. Manually pass the thread
through the eye of the needle from the front
to the back. For details, refer to “Manually
threading the needle” (page 23).
may be damaged. Manually pass the thread
through the eye of the needle from the front
to the back. For details, refer to “Manually
threading the needle” (page 23).
CAUTION
● Select a stitch width of 6.0 mm (15/64 inch)
or less, otherwise the needle may bend or
break.
break.
● After adjusting the stitch width, slowly turn
the handwheel toward you
(counterclockwise) and check that the needle
does not touch the presser foot. If the needle
hits the presser foot, the needle may bend or
break.
(counterclockwise) and check that the needle
does not touch the presser foot. If the needle
hits the presser foot, the needle may bend or
break.