Руководство По Работе для Brother Innov-is NS2750D

Winding/Installing the Bobbin

B-18

Slide the spool cap onto the spool pin.

Slide the spool cap as far as possible to the right, as
shown, with the rounded side on the left.

CAUTION

• If the spool or the spool cap is not installed

correctly, the thread may become tangled
around the spool pin, causing the needle to
break.

• Three spool cap sizes are available, allowing

you to choose a spool cap that best fits the size
of spool being used. If the spool cap is too
small for the spool being used, the thread may
catch on the slit in the spool or the machine
may be damaged. When using mini king thread
spool, use the thread spool insert (mini king
thread spool).
For details on thread spool insert (mini king
thread spool), refer to “Memo” on page B-18.

Memo

• When using the spool as shown below, use the

small spool cap, and leave a small space between
the cap and the spool.

1 Spool cap (small)
2 Spool (cross-wound thread)
3 Space

• When using thread that winds off quickly, such as

transparent nylon thread or metallic thread, place
the spool net over the spool before placing the
spool of thread onto the spool pin.
If the spool net is too long, fold it to fit the size of
the spool.

1 Spool net
2 Spool
3 Spool cap
4 Spool pin

• If a spool of thread whose core is 12 mm (1/2

inch) in diameter and 75 mm (3 inches) high is
inserted onto the spool pin, use the thread spool
insert (mini king thread spool).

1 Thread spool insert (mini king thread spool)
2 12 mm (1/2 inch)
3 75 mm (3 inches)