Руководство По Работе для Brother Innov-is NS2750D
Replacing the Needle
B-32
d
Hold the needle with your left hand, and then use a
screwdriver to turn the needle clamp screw toward
you (counterclockwise) to remove the needle.
screwdriver to turn the needle clamp screw toward
you (counterclockwise) to remove the needle.
• The needle clamp screw can also be loosened or
tightened with the disc-shaped screwdriver.
1 Screwdriver
2 Needle clamp screw
2 Needle clamp screw
• Do not apply a strong force when loosening or
tightening the needle clamp screw, otherwise certain
parts of the machine may be damaged.
parts of the machine may be damaged.
e
With the flat side of the needle toward the rear of the
machine, insert the needle until it touches the needle
stopper.
machine, insert the needle until it touches the needle
stopper.
1 Needle stopper
f
While holding the needle with your left hand, use the
screwdriver to tighten the needle clamp screw by
turning it clockwise.
screwdriver to tighten the needle clamp screw by
turning it clockwise.
g
Press
to unlock all keys and buttons.
CAUTION
• Be sure to insert the needle until it touches the
needle stopper and securely tighten the needle
clamp screw with the screwdriver, otherwise
the needle may break or damage may result.
clamp screw with the screwdriver, otherwise
the needle may break or damage may result.
2
1
1