Руководство По Работе для Brother Innov-is NS2750D

Attaching the Embroidery Foot

B-52

Press

(Needle position button) to raise the needle.

Press .
→ The screen changes, and all keys and operation

buttons are locked (except

Raise the presser foot lever.

Press the black button on the presser foot holder to
remove the presser foot.

1 Black button
2 Presser foot holder

Use the included screwdriver to loosen the presser foot
holder screw, and then remove the presser foot holder.

• The presser foot holder screw can also be loosened

or tightened with the disc-shaped screwdriver.

1 Screwdriver
2 Presser foot holder
3 Presser foot holder screw

Hold the embroidery foot with your right hand, as
shown.

Hold the embroidery foot with your index finger
wrapped around the lever at the back of the foot.

1 Lever
2 Embroidery foot bar

While pressing in the lever with your finger fit the
embroidery foot bar over the needle clamp screw and
then fit the presser foot holder screw into the presser
foot mounting notch to attach the embroidery foot to
the presser foot bar.

1 Embroidery foot bar
2 Needle clamp screw
3 Mounting notch

Secure the embroidery foot with the presser foot
holder screw.

Set the embroidery foot perpendicular.

1 Presser foot holder screw

Attaching the Embroidery Foot

CAUTION

• Be sure to use embroidery foot when doing

embroidery. Using another presser foot may
cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.