Руководство По Работе для Brother Innov-is NS2750D
Attaching the Embroidery Unit
Basic operations B-55
ST
AR
TI
TI
NG
T
O
EMBRO
ID
ER
B
f
Be sure that no objects or hands are near the
embroidery unit and press
embroidery unit and press
.
→ The carriage moves to its initial position.
1 Carriage
→ The screen for selecting the embroidery pattern type
is displayed.
• For details on the embroidery patterns, refer to
“Selecting Embroidery Patterns” on page B-64.
■ Removing the embroidery unit
Make sure that the machine is completely stopped and
follow the instructions below.
follow the instructions below.
a
Remove the embroidery frame.
• For details on removing the embroidery frame, refer
to “Attaching the Embroidery Frame” on page B-62.
b
Press
, and then press
.
→ The embroidery carriage moves into a position
where it can be stored.
c
Turn off the machine.
CAUTION
• Keep your hands and foreign objects away
from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injury may result.
the machine is embroidering. Otherwise,
injury may result.
Note
• If the machine was not initialized correctly, the
initial screen may not appear. This is not a sign of
a malfunction. If this occurs, turn the machine
off, then on again.
a malfunction. If this occurs, turn the machine
off, then on again.
Memo
• Utility stitches cannot be selected when the
embroidery unit is attached.
a
CAUTION
• Always turn off the machine before removing
the embroidery unit.
It may cause malfunctions if removed when
the machine is turned on.
It may cause malfunctions if removed when
the machine is turned on.