Руководство По Работе для Brother Innov-is NQ3500D
Names of Machine Parts and Their Functions
GE
T
T
T
IN
G RE
A
D
Y
Basic operations B-3
B
9 Foot controller jack
Insert the plug on the end of the foot controller cable into the
foot controller jack.
foot controller jack.
0 USB port (for a USB flash drive)
In order to import patterns from a USB flash drive, insert the
USB flash drive directly into the USB port.
USB flash drive directly into the USB port.
Needle and presser foot section
1 Needle bar thread guide
Pass the upper thread through the needle bar thread guide.
2 Needle plate
The needle plate is marked with guides for sewing straight
seams.
seams.
3 Needle plate cover
Remove the needle plate cover to clean the bobbin case and
race.
race.
4 Bobbin cover/bobbin case
Remove the bobbin cover and then insert the bobbin into the
bobbin case.
bobbin case.
5 Feed dogs
The feed dogs feed the fabric in the sewing direction.
6 Presser foot
The presser foot applies pressure consistently on the fabric as
the sewing takes place. Attach the appropriate presser foot for
the selected stitch.
the sewing takes place. Attach the appropriate presser foot for
the selected stitch.
7 Presser foot holder
The presser foot is attached onto the presser foot holder.
8 Presser foot holder screw
Use the presser foot holder screw to hold the presser foot in
place. (page B-34, B-53)
place. (page B-34, B-53)
9 Buttonhole lever
Lower the buttonhole lever when sewing buttonholes and bar
tacks or when darning.
tacks or when darning.
Embroidery Unit
1 Embroidery frame holder
Insert the embroidery frame into the embroidery frame holder
to hold the frame in place. (page B-61)
to hold the frame in place. (page B-61)
2 Frame-securing lever
Press the frame-securing lever down to secure the embroidery
frame. (page B-61)
frame. (page B-61)
3 Embroidery unit connection
Insert the embroidery unit connection into the connection port
when attaching the embroidery unit. (page B-54)
when attaching the embroidery unit. (page B-54)
4 Carriage
The carriage moves the embroidery frame automatically when
embroidering. (page B-54)
embroidering. (page B-54)
5 Release button (located under the embroidery unit)
Press the release button to remove the embroidery unit.
(page B-55)
(page B-55)
i
b
a
c
d
e
f
g
h
CAUTION
• Before inserting or removing the embroidery
unit, turn the main power to OFF.
• After the embroidery frame is set in the frame
holder, be sure the frame-securing lever is
correctly lowered.
correctly lowered.
a
b
d
e
c