Руководство По Работе для Brother Innov-is NQ3500D
LCD Operation
GE
T
T
T
IN
G RE
A
D
Y
Basic operations B-13
B
Using the settings key
Press
to change the default machine settings (needle stop position, embroidery speed, opening display, etc.). Press
or
, after you changed necessary settings.
■ Sewing settings
1 Select whether to use the sewing speed controller to determine the zigzag width. For details, refer to “Satin stitching using the
sewing speed controller” in the “Sewing” section.
2 Make adjustments to character or decorative stitch patterns. For details, refer to “Making adjustments” in the “Decorative
sewing” section.
3 Set to “ON” when using twin needle. (page B-28)
4 Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
5 Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at “3” for normal
4 Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
5 Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at “3” for normal
sewing.) (page B-43)
6 Select either “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” as the utility stitch that is automatically selected when
the machine is turned on.
7 Change the height of the presser foot when sewing is stopped when the pivot key is selected. Adjust the presser foot to one of
the three heights (3.2 mm, 5.0 mm and 7.5 mm). (page B-44)
8 Change the height of the presser foot when the machine is set to free motion sewing mode (page B-45).
9 When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing. This enables the fabric
9 When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing. This enables the fabric
to be fed smoothly (page B-44).
0 When set “ON”, reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch pattern, even
when the reverse button is pressed.
H
Back to beginning key
When sewing is stopped, press this key to return to the beginning of the pattern. For
details, refer to “Returning to the beginning of the pattern” in the “Decorative sewing”
section.
details, refer to “Returning to the beginning of the pattern” in the “Decorative sewing”
section.
–
I
Mirror image key
After selecting the stitch pattern, use this key to create a horizontal mirror image of
the stitch pattern.
the stitch pattern.
B-43
J
Free motion mode key
Press this key to enter free motion sewing mode.
B-45
Page 1
Page 2
Page 3
No. Display
Key Name
Explanation
Page
1
2
3
4
5
6
6
7
8
9
0