Руководство По Работе для Brother Innov-is NS1150E
Attaching the Embroidery Unit
Basic operations B-27
ST
AR
T
T
ING T
O
EMBR
O
IDE
R
R
B
1 Carriage
→ The screen for selecting the embroidery pattern type
is displayed.
• For details on the embroidery patterns, refer to
“Viewing the LCD” on page B-9.
■ Removing the embroidery unit
Make sure that the machine is completely stopped and
follow the instructions below.
follow the instructions below.
a
Remove the embroidery frame.
• For details on removing the embroidery frame, refer
to “Attaching the Embroidery Frame” on page B-33.
b
Press
, and then press
.
→ The embroidery carriage moves into a position
where it can be stored.
c
Turn off the machine.
d
Hold the release button on the bottom left of the
embroidery unit, and slowly pull the embroidery unit
to the left.
embroidery unit, and slowly pull the embroidery unit
to the left.
1 Release button
CAUTION
• Keep your hands and foreign objects away
from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injury may result.
the machine is embroidering. Otherwise,
injury may result.
Note
• If the machine was not initialized correctly, the
initial screen may not appear. This is not a sign of
a malfunction. If this occurs, turn the machine
off, then on again.
a malfunction. If this occurs, turn the machine
off, then on again.
a
CAUTION
• Always turn off the machine before removing
the embroidery unit.
It may cause malfunctions if removed when
the machine is turned on.
It may cause malfunctions if removed when
the machine is turned on.
CAUTION
• Do not carry the embroidery unit by holding
the release button compartment.
a