Руководство По Работе для Brother Innov-is NQ700PRW/ Innov-is NQ700

Upper Threading

GE
T

G RE

Basic operations B-21

Threading the upper thread

Turn on the machine.

Raise the presser foot lever to raise the presser foot.

1 Presser foot lever

→ The upper thread shutter opens so the machine can

be threaded.

Press

(Needle position button) once or twice to

raise the needle.

1 Needle position button

→

The needle is correctly raised when the mark on the
handwheel is at the top, as shown below. Check the

handwheel and, if this mark is not at this position, press

(Needle position button) until it is.

1 Mark on handwheel

Remove the spool cap that is inserted onto the spool
pin.

1 Spool pin
2 Spool cap

Upper Threading

CAUTION

• Three spool cap sizes are available, allowing

you to choose a spool cap that best fits the size
of spool being used. If the spool cap is too
small for the spool being used, the thread may
catch on the slit in the spool or the needle may
break. For more information regarding the
choice of spool caps for your thread choice,
see page B-16.

• When threading the upper thread, carefully

follow the instructions. If the upper threading
is not correct, the thread may become tangled
or the needle may bend or break.

• Never use a thread weight of 20 or lower.
• Use the needle and the thread in the correct

combination. For details on the correct
combination of needles and threads, refer to
“Fabric/thread/needle combinations” on
page B-28.

Note

• If the presser foot is not raised, the machine

cannot be threaded.