Руководство По Работе для Brother Innov-is NQ550PRW / Innov-is NQ550
Winding/Installing the Bobbin
GE
T
T
T
IN
G RE
A
D
Y
Basic operations B-17
B
a
Press
(Needle position button) once or twice to
raise the needle.
b
Turn off the machine.
c
Raise the presser foot lever.
d
Slide the bobbin cover latch to the right.
1 Bobbin cover
2 Latch
2 Latch
e
Remove the bobbin cover.
f
Hold the bobbin with your right hand with the thread
unwinding to the left, and hold the end of the thread
with your left hand. Then, with your right hand, place
the bobbin in the bobbin case.
unwinding to the left, and hold the end of the thread
with your left hand. Then, with your right hand, place
the bobbin in the bobbin case.
g
Lightly hold down the bobbin with your right hand
(1), and then guide the end of the thread around the
tab of the needle plate cover with your left hand (2).
(1), and then guide the end of the thread around the
tab of the needle plate cover with your left hand (2).
1 Tab
h
While lightly holding down the bobbin with your right
hand (1), guide the thread through the slit in the
needle plate cover (2) and lightly pull it with your left
hand (3).
hand (1), guide the thread through the slit in the
needle plate cover (2) and lightly pull it with your left
hand (3).
• The thread enters the tension spring of the bobbin
case.
i
While lightly holding down the bobbin with your right
hand (1), continue guiding the thread through the slit
with your left hand (2) Then, cut the thread with the
cutter (3).
hand (1), continue guiding the thread through the slit
with your left hand (2) Then, cut the thread with the
cutter (3).
CAUTION
• Be sure to hold down the bobbin with your
finger and unwind the bobbin thread
correctly, otherwise the thread may break or
the thread tension will be incorrect.
correctly, otherwise the thread may break or
the thread tension will be incorrect.
2
1
Memo
• The order that the bobbin thread should be
passed through the bobbin case is indicated by
marks around the bobbin case. Be sure to thread
the machine as indicated.
marks around the bobbin case. Be sure to thread
the machine as indicated.