Руководство По Работе для Brother Innov-is NQ550PRW / Innov-is NQ550
Replacing the Presser Foot
GE
T
T
T
IN
G RE
A
D
Y
Basic operations B-29
B
Replacing the presser foot
a
Press
(Needle position button) once or twice to
raise the needle.
b
Turn off the machine.
c
Raise the presser foot lever, if necessary.
d
Press the black button at the back of the presser foot
holder.
holder.
1 Black button
2 Presser foot holder
2 Presser foot holder
e
Place a different presser foot below the holder so that
the presser foot pin is aligned with the notch in the
holder.
the presser foot pin is aligned with the notch in the
holder.
1 Presser foot holder
2 Notch
3 Pin
4 Presser foot type
2 Notch
3 Pin
4 Presser foot type
f
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
foot pin snaps into the notch in the presser foot holder.
1 Presser foot lever
2 Presser foot holder
3 Notch
4 Pin
2 Presser foot holder
3 Notch
4 Pin
The presser foot is attached.
g
Raise the presser foot lever to check that the presser
foot is securely attached.
foot is securely attached.
1 Presser foot lever
Replacing the Presser Foot
CAUTION
• Use the presser foot appropriate for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the
needle to bend or break.
needle may hit the presser foot, causing the
needle to bend or break.
• Only use presser feet designed specifically for
this machine. Use of any other presser foot
may result in injuries or damage to the
machine.
may result in injuries or damage to the
machine.
CAUTION
• Before replacing the presser foot, be sure to
turn off the machine, otherwise injuries may
occur if the “Start/Stop” button or any other
button is pressed and the machine starts
operating.
occur if the “Start/Stop” button or any other
button is pressed and the machine starts
operating.
a
b
1
2
3
4
J
2
3
4
1
1