Руководство По Работе для Brother Innov-is XV8500D
LINE SCAN
22
Custom patterns can be created from drawings.
You can create patterns by scanning your
drawings using the included scanning frame or
importing an image from USB media, computer or
SD card.
You can create patterns by scanning your
drawings using the included scanning frame or
importing an image from USB media, computer or
SD card.
Recommended line drawings for Line Scan
• Line drawings must be drawn clearly using lines
with approximately 1 mm thickness.
• Line drawings should be drawn in a strong
contrast.
• If the lines are too short or gathered too densely,
they will not be scanned correctly.
Using the Scanning Frame to
Create a Pattern with Line
Scan
Create a Pattern with Line
Scan
a
Press .
The image display screen appears.
b
Press .
*
To import an image from USB media, computer or
SD card, press
,
,
or
.
For details, refer to page 21.
*
If you scan the image, make sure that the scanning
frame is attached to the machine. Refer to “Using
the Scanning Frame” on page 18.
frame is attached to the machine. Refer to “Using
the Scanning Frame” on page 18.
LINE SCAN
Note
• For details on creating patterns using color
illustrations, refer to “ILLUSTRATION
SCAN” on page 25.
SCAN” on page 25.
• If you cannot scan the drawings as
expected, you can edit the design in the My
Design Center. Refer to “PATTERN
DRAWING SCREEN” on page 6.
Design Center. Refer to “PATTERN
DRAWING SCREEN” on page 6.
• Line drawings are scanned without
recognizing the thickness of lines. If you
want to change the thickness of lines,
specify in the Settings screen. Refer to
“STITCH SETTINGS SCREEN” on page 14.
want to change the thickness of lines,
specify in the Settings screen. Refer to
“STITCH SETTINGS SCREEN” on page 14.
• Line drawings are scanned as black lines. If
you want to change the colors, specify in
the My Design Center. Refer to “Drawing
Regions” on page 10.
the My Design Center. Refer to “Drawing
Regions” on page 10.