Руководство По Работе для Brother Innov-is 5000
EDITING STITCH PATTERNS
126
Changing Thread Density
(for Satin Stitch Patterns Only)
(for Satin Stitch Patterns Only)
After selecting the pattern, press
to select
your preferred thread density.
Returning to the Beginning of the
Pattern
Pattern
When sewing character/decorative stitches, you
can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.
can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.
a
Press the “Start/Stop” button to stop the
machine, and then press
.
→ Sewing returns to the beginning of the selected
pattern (“W”) from the point where sewing was
stopped.
stopped.
CAUTION
If the stitches bunch when thread density is
changed to
, return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
• Even if you select a new pattern after chang-
ing the thread density, the thread density
remains the same until you change it.
remains the same until you change it.
• You cannot change thread density for a
combined pattern after the combination is
finished.
finished.
Memo
If this key is pressed when sewing is stopped,
patterns can be added at the end of a
combined stitch pattern. (In this example, “!” is
added.)
patterns can be added at the end of a
combined stitch pattern. (In this example, “!” is
added.)