Руководство По Работе для Brother Innov-is 5000

BEFORE EMBROIDERING

146

Hold the embroidery foot in place with
your right hand, and then use the included
screwdriver to securely tighten the presser
foot holder screw.

Press

to unlock all keys and

buttons.

→ All keys and operation buttons are unlocked, and

the previous screen is displayed.

Attaching the Embroidery Unit

■ About the Embroidery Unit

Turn the main power to OFF, and remove
the flat bed attachment.

Open the cover of the connection port.

CAUTION

• Use the included screwdriver to firmly tighten

the screw of the presser foot holder. If the
screw is loose, the needle may strike the
presser foot and possibly cause injury.

CAUTION

• Do not move the machine with the

embroidery unit attached. The embroidery
unit could fall off and cause injury.

• Keep your hands and foreign objects away

from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injury may result.

• If the embroidery unit could not be initialized

correctly, a buzzer will sound. If this happens,
go through the initialization process again.
This is not a malfunction.

Note

• You can also sew utility/decorative stitches

with the embroidery unit attached. Set the
feed dog position switch on the embroidery
unit to the appropriate setting.

• Be sure to turn off the power before install-

ing the embroidery unit. Otherwise, the
machine may be damaged.

• Do not touch the inner connector of the

embroidery unit. The pins on the embroidery
unit connection may be damaged.

• Do not apply strong force to the embroidery

unit carriage or pick up the unit by the car-
riage. Otherwise, the embroidery unit may
be damaged.

• Store the embroidery unit in the proper stor-

age case.

CAUTION

• Be sure to replace the cover when the

embroidery unit is not installed.