Руководство По Работе для Brother Innov-is 5000
CARE AND MAINTENANCE
236
CARE AND MAINTENANCE
About the Maintenance Message
Once this message appears, it is recommended to
take your machine to an authorized retailer for a
regular maintenance check. Although this message
will disappear and the machine will continue to
take your machine to an authorized retailer for a
regular maintenance check. Although this message
will disappear and the machine will continue to
function once you press
, the message will
display several more times until the appropriate
maintenance is performed.
maintenance is performed.
Please take the time to arrange the maintenance
your machine requires once this message appears.
Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.
your machine requires once this message appears.
Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.
Cleaning the LCD Screen
If the screen is dirty, gently wipe it with a soft, dry
cloth. Do not use organic solvents or detergents.
cloth. Do not use organic solvents or detergents.
Cleaning the Machine Casing
If the surface of the machine is dirty, lightly soak a
cloth in a neutral detergent, squeeze it out firmly,
and then wipe the surface. Then wipe again with a
dry cloth.
cloth in a neutral detergent, squeeze it out firmly,
and then wipe the surface. Then wipe again with a
dry cloth.
Cleaning the Race
If dust or bits of dirt collect in the race or bobbin
case, the machine will not run well, and the
bobbin thread detection function may not operate.
Keep the machine clean for best results.
case, the machine will not run well, and the
bobbin thread detection function may not operate.
Keep the machine clean for best results.
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Turn the main power to OFF.
c
Remove the needle and the presser foot
holder (see pages 38 through 39).
holder (see pages 38 through 39).
d
Remove the flat bed attachment or the
embroidery unit if either is attached.
embroidery unit if either is attached.
e
Grasp both sides of the needle plate cover,
and then slide it toward you.
and then slide it toward you.
a Needle plate cover
→ The needle plate cover is removed.
f
Grasp the bobbin case, and then pull it out.
a Bobbin case
g
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the race
and its surrounding area.
to remove any lint and dust from the race
and its surrounding area.
*
Do not apply oil to the bobbin case.
a Cleaning brush
b Race
b Race
CAUTION
• Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result.
a
a
a
b