Руководство По Работе для Brother Innov-is 5000
ADJUSTING THE SCREEN
Ap
pe
ndi
x
pe
ndi
x
239
8
c
Using the included touch pen, lightly touch
the center of each +, in order from 1 to 5.
the center of each +, in order from 1 to 5.
*
If the buzzer sounds one time after you press
number 5, the operation is finished. If the buzzer
sounds twice, there was an error. In this case, repeat
the steps above.
number 5, the operation is finished. If the buzzer
sounds twice, there was an error. In this case, repeat
the steps above.
d
Turn the main power to OFF, then turn it
back to ON.
back to ON.
Note
• Only use the included touch pen to touch the
screen. Do not use a mechanical pencil, pin,
or other sharp object. Do not press strongly
on the screen. Otherwise, damage may
result.
or other sharp object. Do not press strongly
on the screen. Otherwise, damage may
result.
Note
• If you finish the screen adjustment and the
screen still does not respond, or if you can-
not do the adjustment, contact your autho-
rized dealer.
not do the adjustment, contact your autho-
rized dealer.
+1
+4
+2
+5
+3