Руководство По Работе для Brother Innov-is 5000
ERROR MESSAGES
248
■ Alarm Sounds
If the operation procedure was correct, the machine
will beep once. If the operation procedure was
incorrect, the machine will beep twice or four times.
will beep once. If the operation procedure was
incorrect, the machine will beep twice or four times.
This message is displayed when
replacing the embroidering
bobbin thread.
replacing the embroidering
bobbin thread.
This message is displayed when
rotating a saved combined
pattern in the Embroidery
screen.
rotating a saved combined
pattern in the Embroidery
screen.
This message is displayed when
you try to use incompatible USB
media.
you try to use incompatible USB
media.
This message is displayed when
it seems that the upper thread
has not been threaded correctly.
it seems that the upper thread
has not been threaded correctly.
This message is displayed when
is pressed (the
presser foot is raised).
This message is displayed when
the automatic needle threading
button is pushed while twin
needle sewing is set.
the automatic needle threading
button is pushed while twin
needle sewing is set.
This confirmation message
appears after the machine is
turned on and the carriage of the
embroidery unit has moved to its
initial position.
appears after the machine is
turned on and the carriage of the
embroidery unit has moved to its
initial position.
Memo
If you want to turn the alarm off, press
. See page 16 for more details.