Руководство По Работе для Brother Innov-is 5000
UPPER THREADING
G
etting
Re
ad
ad
y
33
1
j
Pull the thread up along the left side of the
thread path guide to the top left corner of
the threading path cover.
thread path guide to the top left corner of
the threading path cover.
a Top left corner
b Threading path cover
b Threading path cover
k
Pull the thread down to the needle bar
along the left side of the thread path guide.
along the left side of the thread path guide.
*
Make sure the thread is hooked at the top corner
and positioned behind the transparent front cover.
and positioned behind the transparent front cover.
a Thread take-up lever check window
b Transparent front cover
b Transparent front cover
l
Lower the presser foot lever.
m
Holding the thread with both hands, pass
the thread through both the upper and
lower needle bar thread guides.
the thread through both the upper and
lower needle bar thread guides.
a Needle bar thread guide (upper)
b Needle bar thread guide (lower)
n
Pass the thread through the eye of the
needle from front to back.
needle from front to back.
o
Pass the thread through the presser foot,
and then pull out about 100-150 mm
(approx. 4-6 inches) of thread toward the
back of the machine.
and then pull out about 100-150 mm
(approx. 4-6 inches) of thread toward the
back of the machine.
a 10 cm-15 cm (approx. 4-6 inches)
p
Press
to unlock all keys and
buttons.
Memo
Look through the thread take-up lever check
window and check that the thread is correctly
fed through the take-up lever, turning the
handwheel toward you.
window and check that the thread is correctly
fed through the take-up lever, turning the
handwheel toward you.
(B)
b
a
(C)
b
a
a Take-up lever b Thread
a
b
1
2
a
b
a