Руководство По Работе для Brother Innov-is 5000
SELECTING UTILITY STITCHES
U
tili
ty
ty
S
tit
ch
es
59
3
Selecting a Stitch
a
Turn the main power to ON.
→ Either “1-01 Straight stitch (Left)” or “1-03 Straight
stitch (Middle)” is selected, depending on the setting
selected in the setting screen.
selected in the setting screen.
b
Use
to select the
category you want.
*
Press
to view this screen if another screen
displays.
*
Press
to view the next page.
a Preview of the selected stitch
b Stitch selection screen
c
Press the key of the stitch you want to sew.
■ Using the Mirror Image Key
Depending on the type of utility stitch you select,
you may be able to sew a horizontal mirror image of
the stitch.
you may be able to sew a horizontal mirror image of
the stitch.
If
is lit when you select a stitch, it will be
possible to make a mirror image of the stitch.
Press
to create a horizontal mirror image of
the selected stitch.
The key will display as
.
■ Using the Image Key
You can display an image of the selected stitch. You
can also check and change the colors of the image
on the screen.
can also check and change the colors of the image
on the screen.
a
Press .
→ An image of the selected stitch is displayed.
Memo
For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.
“STITCH SETTING CHART” at the end of this
manual.
a
b
Note
If
is light gray after you select a stitch,
you cannot create a horizontal mirror image of
the selected stitch (this is true of buttonholes,
multi-directional sewing, and others).
the selected stitch (this is true of buttonholes,
multi-directional sewing, and others).