Руководство По Работе для Brother Innov-is 5000
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
69
3
Flat Fell Seam
Use for reinforcing seams and finishing edges
neatly.
neatly.
a
Select
and attach presser foot “J”.
b
Sew the finish line, then cut half of the seam
allowance from the side on which the flat
fell seam will lie.
allowance from the side on which the flat
fell seam will lie.
*
When the automatic thread cutting and automatic
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the “Reverse/Reinforcement Stitch”
button to sew a reinforcement stitch and trim the
thread automatically at the end of sewing.
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the “Reverse/Reinforcement Stitch”
button to sew a reinforcement stitch and trim the
thread automatically at the end of sewing.
a About 12 mm (approx. 1/2 inch)
b Wrong side
b Wrong side
c
Spread the fabric out along the finish line.
a Finish line
b Wrong side
b Wrong side
d
Lay both seam allowances on the side of the
shorter seam (cut seam) and iron them.
shorter seam (cut seam) and iron them.
a Wrong side
e
Fold the longer seam allowance around the
shorter one, and sew the edge of the fold.
shorter one, and sew the edge of the fold.
a Wrong side
a Surface
Pintuck
a
Mark along the folds on the wrong side of
the fabric.
the fabric.
a Wrong side
b
Turn the fabric and iron the folded parts
only.
only.
a Surface
a
b
a
b
a
a
a
a
a
Finished flat fell seam
a
a