Руководство По Работе для Brother Innov-is XV8500D

Скачать
Страница из 428
SEWING THE STITCHES
U
tili
ty
 S
tit
ch
es
157
3
e
Gently hold the end of the upper thread and 
start sewing. 
→ The machine stops automatically when sewing is 
finished.
f
From the wrong side of the fabric, pull the 
end of the bobbin thread to pull the upper 
thread through to the wrong side of the 
fabric. Tie the two thread ends together and 
cut the threads.
g
After the button is attached, select another 
stitch and rotate the handwheel toward you 
(counterclockwise) to raise the feed dogs.
■ Attaching 4 Hole Buttons
Sew the two holes closest to you. Then raise the 
presser foot and move the fabric so that the needle 
goes into the next two holes, and sew them in the 
same way. 
■ Attaching a Shank to the Button 
a
Pull the shank lever toward you before 
sewing.
a Shank lever 
b
Pull the two ends of the upper thread 
between the button and the fabric, wind 
them around the shank, and then tie them 
firmly together. 
c
Tie the ends of the bobbin thread from the 
beginning and end of sewing together on 
the wrong side of the fabric.
d
Cut off any excess thread.
Eyelet 
Use this stitch for making belt holes and other 
similar applications.
 CAUTION
• Make sure the needle does not strike the 
button during sewing. The needle may break 
and cause injury. 
Note
• When sewing is completed, be sure to 
select the other stitch and rotate the 
handwheel toward you (counterclockwise) 
to raise the feed dogs.
Stitch
Stitch name
Presser foot
Eyelet
Star eyelet