Руководство По Работе для Brother Innov-is XV8500D
CONFIRMING THE PATTERN POSITION
264
d
Use
or
to adjust the LED pointer so
that it indicates the actual needle drop
point.
point.
e
Press
twice to return to the original
screen.
■ Adjusting the Brightness of the LED
Pointer
a
Follow the steps from
a
to
d
to display
the embroidery foot with LED pointer
adjustment screen.
adjustment screen.
b
Use
or
to adjust the brightness of
the LED pointer.
c
Press
twice to return to the original
screen.
Aligning the Embroidering
Position Using the Built-In
Camera
Position Using the Built-In
Camera
The camera built into this machine can be used to
easily align the embroidering position. This is
useful for patterns which need to be embroidered
in a particular position as shown below.
easily align the embroidering position. This is
useful for patterns which need to be embroidered
in a particular position as shown below.
a
Use a chalk pencil to draw a cross at the
desired embroidering location.
desired embroidering location.
a Chalk pencil mark
*
Display the grid lines or cross grid lines in the
pattern display area to check the pattern orientation.
(Refer to “Changing the Embroidery Frame Display”
on page 306.)
pattern display area to check the pattern orientation.
(Refer to “Changing the Embroidery Frame Display”
on page 306.)
b
Hoop the fabric.
c
Select the pattern on your sewing machine
and press
.
Note
• The specified setting is saved in the
machine’s memory. This is useful for
positioning during continuous
embroidering.
positioning during continuous
embroidering.
• For normal use, return the setting to “00”.
Note
• When hooping the fabric in the embroidery frame,
make sure that the embroidery pattern will fit within
the embroidering area of the frame being used.
the embroidering area of the frame being used.
a Embroidering area
b Embroidery pattern size
b Embroidery pattern size
c Chalk pencil mark