Руководство По Работе для Brother Innov-is XV8500D
VARIOUS EMBROIDERING FUNCTIONS
286
Uninterrupted Embroidering
(Using a Single Color :
Monochrome)
(Using a Single Color :
Monochrome)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will continue
till the pattern is completed.
instead of multicolor. The machine will continue
till the pattern is completed.
a
Press .
*
Press the key again to return to the original setting.
→ The thread color displayed on the screen will be
grayed out.
Display the Fabric While
Aligning the Embroidering
Position
Aligning the Embroidering
Position
The fabric hooped in the embroidery frame can be
displayed on the LCD so that the embroidery position
can be easily aligned.
displayed on the LCD so that the embroidery position
can be easily aligned.
Example:
a
Hoop the fabric in the embroidery frame, and
then attach the frame to the embroidery
machine.
then attach the frame to the embroidery
machine.
b
Select the pattern, and then press
.
VARIOUS EMBROIDERING FUNCTIONS
Memo
• Even if uninterrupted embroidering
has
been set, the automatic thread cutting
function and the thread trimming function
can be used (see page 304 and 304).
function and the thread trimming function
can be used (see page 304 and 304).
Note
• When embroidery frame (small: H 2 cm × W 6 cm (H
1 inch × W 2-1/2 inches)) is installed, the built-in
camera cannot be used to align the embroidering
position. Install medium embroidery frame or larger.
camera cannot be used to align the embroidering
position. Install medium embroidery frame or larger.
• For details on using thicker fabric such as quilting,
refer to “Positioning the Pattern on Thick Fabric”
(page 289).
(page 289).
Note
• When using light to medium weight fabrics, check
the settings screen to make sure “Fabric Thickness
Sensor” is set to “OFF”.
Sensor” is set to “OFF”.