Руководство По Работе для Brother Innov-is XV8500D
USEFUL FUNCTIONS
Se
w
in
g Ba
sics
97
2
b
Align the tabs on the knee lifter with the
notches in the knee lifter slot on the front of
the machine. Insert the knee lifter bar as far
as possible.
notches in the knee lifter slot on the front of
the machine. Insert the knee lifter bar as far
as possible.
c
Use your knee to move the knee lifter bar to
the right in order to raise the presser foot.
Release the knee lifter to lower the presser
foot.
the right in order to raise the presser foot.
Release the knee lifter to lower the presser
foot.
Automatic Fabric Sensor System
(Automatic Presser Foot
Pressure)
(Automatic Presser Foot
Pressure)
The thickness of the fabric is automatically
detected and the presser foot pressure is
automatically adjusted with an internal sensor
while sewing, to insure that your fabric is fed
smoothly. The fabric sensor system works
continuously while sewing. This function is useful
for sewing over thick seams (see page 87), or
quilting (see page 131).
detected and the presser foot pressure is
automatically adjusted with an internal sensor
while sewing, to insure that your fabric is fed
smoothly. The fabric sensor system works
continuously while sewing. This function is useful
for sewing over thick seams (see page 87), or
quilting (see page 131).
a
Press .
→ The settings screen appears.
b
Set “Automatic Fabric Sensor System” to
“ON”.
“ON”.
c
Press
to return to the original screen.
CAUTION
• Only change position of the knee lifter handle
when knee lifter is not on the machine,
otherwise the knee lifter may damage the
mounting slot on front of the machine.
otherwise the knee lifter may damage the
mounting slot on front of the machine.
Note
• If the knee lifter bar is not pushed into the
mounting slot as far as possible, it may
come out during use.
come out during use.
CAUTION
• Be sure to keep your knee away from the knee
lifter during sewing. If the knee lifter is pushed
during machine operation, the needle may
break or the thread tension may loosen.
during machine operation, the needle may
break or the thread tension may loosen.
Memo
• When the presser foot is in the up position,
move the knee lifter to the far right and then
release to return the presser foot to the
down position.
release to return the presser foot to the
down position.