Руководство По Работе для Brother BX3000

—

While lightly holding the thread, turn the
needle threader lever toward the front of
the machine (toward you). The hook will
pull the thread through the needle.

Raise the needle threader lever.

Pull the loop of the thread passed through
the eye of the needle toward the rear of
the machine.

1 Loop of thread

CAUTION

Raise the presser foot lever.

Pass the end of the thread through the
presser foot, and then pull out about 5 cm
(2 inches) of thread toward the rear of the
machine.

1 5 cm (2 inches)

Note

● If you incorrectly feed the thread you may

cause sewing problems.

●

Be careful not to pull on the thread with
force or it may bend the needle.

●

If the thread does not pass through the
eye of the needle, start from step

again.