Руководство По Работе для Brother Innov-is XV8550D
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
143
3
b
Attach presser foot “N”. Sew scallop
stitches along the edge of the fabric.
stitches along the edge of the fabric.
*
Do not sew directly on the edge of the fabric.
c
Trim along the seam, making sure not to cut
the stitches.
the stitches.
Crazy Quilting
For a decorative look called “Crazy Quilting”, the
following stitches can be sewn on top of a pressed
seam allowance.
following stitches can be sewn on top of a pressed
seam allowance.
a
Select a straight stitch and attach presser
foot “J”.
foot “J”.
b
With the right sides facing each other, sew
two pieces of fabric together, and then
press open the seam allowance.
two pieces of fabric together, and then
press open the seam allowance.
a Straight stitch
b Seam margins
b Seam margins
c 6.5 mm (approx. 1/4 inch)
d Wrong side
d Wrong side
c
Select a stitch for top stitching.
d
Place the fabric right side up in the
machine, and center the presser foot over
the seam when sewing.
machine, and center the presser foot over
the seam when sewing.
a Right side of fabric
Smocking Stitches
Use smocking stitches for decorative sewing on
clothes, etc.
clothes, etc.
a
Select a straight stitch and attach presser
foot “J”.
foot “J”.
b
Set the stitch length to 4.0 mm (approx.
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page 91 and “Setting
the Thread Tension” on page 92).
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page 91 and “Setting
the Thread Tension” on page 92).
c
Pull the bobbin and upper threads out by
50 mm (approx. 2 inches).
50 mm (approx. 2 inches).
d
Sew the seams, leaving approximately
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 2 inches).
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 2 inches).
a Approximately 10 mm (approx. 3/8 inch)
Memo
• Use a seam sealant to secure the edges of
the scallop stitches.