Руководство По Работе для Brother Innov-is XV8550D

BEFORE EMBROIDERING

212

Turn the main power to OFF, and remove
the flat bed attachment.

Insert the embroidery unit connection into
the machine connection port. Push lightly
on the connection port cover until the unit
clicks into place.

a Embroidery unit connection

b Machine connection port

Turn the main power to ON.

→ The following message will appear.

Press .

→ The carriage will move to the initialization position.

■ Removing the Embroidery Unit

Press ,

then

press .

→ The carriage will move to the removal position.

Turn the main power to OFF.

Note

• You can also sew utility/decorative stitches

with the embroidery unit attached. Touch

and

. The feed dog will

automatically raise for utility and decorative
stitching.

• Be sure to turn off the power before

installing the embroidery unit. Otherwise,
the machine may be damaged.

• Do not touch the inner connector of the

embroidery unit. The pins on the
embroidery unit connection may be
damaged.

• Do not apply strong force to the embroidery

unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit
may be damaged.

• Store the embroidery unit in a safe place to

prevent damage to the unit.

Note

• Be sure there is no gap between the

embroidery unit and the sewing machine. If
there is a gap, the embroidery patterns will
not embroider with the correct registration.

• Do not push on the carriage when installing

the embroidery unit onto the machine.
Moving the carriage may damage the
embroidery unit.

CAUTION

• Always remove the embroidery frame before

pressing

. Otherwise, the frame may

strike the embroidery foot, and possibly cause
injury.

Note

• Be sure to turn off the machine before

removing the embroidery unit, otherwise
damage to the machine may result.