Руководство По Работе для Brother Innov-is XV8550D
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
24
Using the Multi-purpose
Screwdriver
Screwdriver
Since the screwdriver can be changed to three
different positions, it can be extremely useful for
the various machine preparations.
different positions, it can be extremely useful for
the various machine preparations.
■ Position “1”
You can install/remove the presser foot holder,
needle clamp screw.
needle clamp screw.
■ Position “2”
You can install/remove the needle plate.
■ Position “3”
The multi-purpose screwdriver can be positioned
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
Using the Spool Stand
The included spool stand is useful when using
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
Note
• When rotating the multi-purpose
screwdriver, do not forcefully rotate it in the
direction that it does not rotate; otherwise, it
may break.
direction that it does not rotate; otherwise, it
may break.
1
2
3
4
5
6
7
8
9
No.
Part Name
Part Code
1
Telescopic thread guide
XE0776-001
2
Spool support
XE4637-001
3
Spool pin × 2
XA6313-051
4
Screw and washer
XC7568-051
5
Spool cap (XL) × 2
XE0779-001
6
Spool holder × 2
XA0679-050
7
Spool cap base × 2
XE0780-001
8
Spool felt × 2
XC7134-051
9
Ring × 4
026030-136