Руководство По Работе для Brother Innov-is XV8550D
My Design Center
8
LINE SCAN
355
→ When the following message appears, press
.
→ Scanning begins.
*
*
To stop scanning and return to the screen in
step
b
, press
.
c
When scanning is finished, specify the
“Gray-Scale Detection level” on the screen
if necessary.
“Gray-Scale Detection level” on the screen
if necessary.
The “Gray-Scale Detection level” can change the
black and white threshold for the image.
black and white threshold for the image.
*
If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
changed, first continue the operation without
specifying settings and check the results.
*
To stop scanning and return to the screen in
step
b
, press
. The scanned image will be
deleted when you return to the previous screen.
d
Move
to frame the image for the
pattern.
e
Press .
→ The screen for confirming the converted image
appears.
f
In the screen for confirming the converted
image, you can adjust the “Gray-Scale
Detection level” again, if necessary.
image, you can adjust the “Gray-Scale
Detection level” again, if necessary.
*
If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
changed, first continue the operation without
specifying settings and check the results.
*
To enlarge the image, press
.
*
To display the image before being converted, press
. Compare the images before and after
being converted, and then change the settings if
necessary.
necessary.
*
To return to the previous screen, press
.
→ After changes to the settings of “Detection level” is
applied,
changes to
. Press
to check that the image is as desired.
g
Press .
Note
• When scanning starts, some of the machine
lights will turn off in a certain
circumstances, in order to increase the
scan quality. The machine lights will return
to their original brightness when scanning
ends.
circumstances, in order to increase the
scan quality. The machine lights will return
to their original brightness when scanning
ends.