Руководство По Работе для Brother Innov-is XV8550D

LOWER THREADING

etting

Re
ad

With your right hand, hold the thread near
the thread spool. With your left hand, hold
the end of the thread, and use both hands to
pass the thread through the thread guide.

a Thread guide

Pass the thread around the pre-tension disk
making sure that the thread is under the
pre-tension disk.

a Pre-tension disk
→ Make sure that the thread passes under the pre-

tension disk.

b Pre-tension disk

c Pull it in as far as possible.
→ Check to make sure thread is securely set between

pre-tension disks.

Wind the thread clockwise around the
bobbin 5-6 times.

CAUTION

• If the thread spool and/or spool cap are set

incorrectly, the thread may tangle on the spool
pin and cause the needle to break.

• Use the spool cap (large, medium, or small)

that is closest in size to the thread spool. If a
spool cap smaller than the thread spool is
used, the thread may become caught in the slit
on the end of the spool and cause the needle
to break.

Memo

• When sewing with fine, cross-wound

thread, use the small spool cap, and leave a
small space between the cap and the
thread spool.

a Spool cap (small)
b Thread spool (cross-wound thread)
c Space

• If a spool of thread whose core is 12 mm

(1/2 inch) in diameter and 75 mm (3 inches)
high is inserted onto the spool pin, use the
mini spool cap.

a Spool cap (mini king thread spool)
b 12 mm (1/2 inch)

c 75 mm (3 inches)