Руководство По Работе для Brother Innov-is XV8550D
UPPER THREADING
G
etting
Re
ad
ad
y
63
1
e
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
as possible, then return the spool pin to its
original position.
f
While holding the thread with both hands,
pull the thread up from under the thread
guide plate.
pull the thread up from under the thread
guide plate.
a Thread guide plate
g
While holding the thread in your right
hand, pass the thread through the thread
guide in the direction indicated.
hand, pass the thread through the thread
guide in the direction indicated.
h
Guide the thread down, up, then down
through the groove, as shown in the
illustration.
through the groove, as shown in the
illustration.
CAUTION
• If the thread spool and/or spool cap are set
incorrectly, the thread may tangle on the spool
pin and cause the needle to break.
pin and cause the needle to break.
• Use the spool cap (large or medium) or the
thread spool insert (mini king thread spool)
that is closest in size to the thread spool. If a
spool cap smaller than the thread spool is
used, the thread may become caught in the slit
on the end of the spool and cause the needle
to break.
that is closest in size to the thread spool. If a
spool cap smaller than the thread spool is
used, the thread may become caught in the slit
on the end of the spool and cause the needle
to break.
Memo
• When sewing with fine, cross-wound
thread, use the small spool cap, and leave a
small space between the cap and the
thread spool.
small space between the cap and the
thread spool.
a Spool cap (small)
b Thread spool (cross-wound thread)
b Thread spool (cross-wound thread)
c Space
• If a spool of thread whose core is 12 mm
(1/2 inch) in diameter and 75 mm (3 inches)
high is inserted onto the spool pin, use the
thread spool insert (mini king thread spool).
high is inserted onto the spool pin, use the
thread spool insert (mini king thread spool).
a Thread spool insert (mini king thread spool)
b 12 mm (1/2 inch)
c 75 mm (3 inches)
c 75 mm (3 inches)
Memo
• Look in the upper groove area to check if
the thread catches on the take-up lever
visible inside the upper groove area.
visible inside the upper groove area.
a Look in the upper groove area