Руководство По Работе для Brother Innov-is XV8550D

STITCH SETTINGS SCREEN

■ Region settings

a Shows the stitch type and color for the selected

region.

b Shows the stitch settings for the selected region.

Fill stitch settings

Stippling stitch settings

Decorative fill

Use

to select the line or region to be

changed.

 Each press of

moves the highlighting of the

selected pattern in order.

Select the setting to be changed, and then
change the setting in the screen that
appears. (In this example, the sewing
direction will be changed.)

 The setting screen appears.

Press

, and then use

to change the

direction.

Press

to apply the setting.

appears on the tab for settings that were changed.

Change other settings in the same way.

Direction

Specifies the sewing direction. Select
“Manual” to change to the desired direction
of fill stitch.

Density

Specifies the stitch density of fill stitch.

Pull

compensation

Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.

Under

sewing

Select if you need or do not need the under
sewing for the stabilized fabric.

Run pitch

Specifies the length of a stitch of the
stippling stitch.

Spacing

Specifies the spacing between the stitches
when embroidering the stippling stitch.

Distance

Specifies the offset from the pattern outline.

Size

Increases/reduces the size of the pattern.

Direction

Specifies the rotation angle of the pattern.

Outline

Select whether (ON) or (OFF) the outline is
also converted to embroidery data. If “ON” is
selected, the number of thread jumps can be
reduced.