Руководство По Работе для Brother Innov-is XV8550D
MY DESIGN CENTER WITH SCAN
20
b
Using the magnets, affix a picture to the
scanning frame and attach the frame to the
machine. Refer to “Using the Scanning
Frame” on page 18.
scanning frame and attach the frame to the
machine. Refer to “Using the Scanning
Frame” on page 18.
c
Press .
When the following message appears, press
.
Scanning begins.
*
*
To stop scanning and return to the screen in
step
c
, press
.
d
When scanning is finished, scanned image is
displayed transparently in the pattern
drawing area.
displayed transparently in the pattern
drawing area.
e
Using the included touch pen, press
,
and then draw lines to trace the image.
*
For details on drawing lines, refer to “Drawing
Lines” on page 8.
Lines” on page 8.
a Transparency adjustment
*
Press
or
to adjust the transparency of the
background.
Each press of
lightens the background, making
the line pattern darker. Each press of
darkens the
background, making the line pattern lighter.
f
After editing the pattern, press
to
specify the settings for pattern.
g
Press
to create the embroidery
pattern.
Note
• When scanning starts, some of the machine
lights will turn off in certain circumstances,
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
• You can import an image of 2 MB or smaller
from USB media, computer or SD card.
a