Руководство По Работе для Brother DZ1500FL

16

Before sewing, pull the thread loop to the 

6

right and then pull the thread tail towards 
the back of the machine following the 
opening in the presser foot.

The automatic needle threader cannot be 

 

●

used with the thread-needle combinations 
illustrated in the chart shown above.   
Transparent nylon thread can be used 
regardless of the chart, providing the 
needle used is a #14 or #16.

Rotate handwheel towards you until 

1

needle is in the highest position, 
and lower presser foot.
Take thread in your left hand, and 

2

gently pull it forward.

Lower automatic needle threader.

3

Pull thread along the right side of the pin.

 

✽

Do not force the needle threader lower 

 

✽

than the eye of the needle. Be sure that 
the needle is in the highest position.

Turn the needle threader lever all the 

4

way in the direction of 1 and when 
the hook extends from the needle 
hole, pull the thread in the direction 
of 2 to catch it on the hook.

While holding the thread gently, return 

5

the needle threader lever to the right. As 
you do this the hook that has caught the 
thread will move as well, pulling a loop 
of thread through the eye of the needle.

Pin

Thread

Hook

Automatic 
Needle 
Threader

Pull the thread to 

 

✽

the left and check 
that it is caught 
on the hook.

Needle (HLX5)

Thread

#9

#20 #30 #50 #60

#11

#20 #30

#14

#20 #30

#16

#20

a

b

c

d

If using transparent nylon 

thread, metallic thread, or 

other strong thread, place 

the included spool net over 

the spool before using.

If the spool net is too long, 

fold it once to match it to the 

spool size before placing it 

over the spool.

Spool net

1

Thread spool

2

Spool pin

3

Spool cap

4