Руководство По Работе для Brother VX1445

26

■ Attaching the extra spool pin

Put the extra spool pin in the hole on the top of the 
machine. Put the second spool of thread onto the 
extra spool pin.

■ Twin needle threading

You should thread each needle separately.

● You cannot use the needle threader to 

thread the twin needle. Instead, thread the 
twin needle by hand, from front to back. 
Using the needle threader may damage the 
machine.

1

The path for threading the machine to the 
needle bar thread guide is the same as for 
normally threading the machine (for a single 
needle). See page 18 for more details.

2

3

The path for threading the machine to the thread 
take-up lever is the same as for normally 
threading the machine (for a single needle). See 
page 18 for more details.

4

Do not pass the thread behind the needle bar 
thread guide.

1 Left needle thread passes through the needle 

bar thread guide.

2 Right needle thread passes in front of the needle 

bar thread guide.

3 Needle bar thread guide

5

For details on changing the presser foot, refer 
to “Changing the presser foot” on page 10.

6

1 First spool
2 Second spool

●

●

1

3

2