Руководство По Работе для Brother VX3250F

2

• Do not use the machine near a heat 

source, such as a stove or iron; 

otherwise, the machine, power cord 

or garment being sewn may ignite, 

resulting in fire or an electric shock.

• Do not place this machine on an 

unstable surface, such as an unsteady 

or slanted table, otherwise the 

machine may fall, resulting in 

injuries.

Special care is required when 

sewing:
• Always pay close attention to the 

needle. Do not use bent or damaged 

needles.

• Keep fingers away from all moving 

parts. Special care is required around 

the machine needle.

• Do not turn on the machine while 

pressing down the foot controller. 

The machine may start unexpectedly 

and cause personal injury or damage 

to the machine.

• Switch the machine to the symbol 

“O” position to turn it off when 

making any adjustments in the needle 

area.

• Do not use a damaged or incorrect 

needle plate, as it could cause the 

needle to break.

• Do not push or pull the fabric when 

sewing, and follow careful instruction 

when freehand stitching so that you 

do not deflect the needle and cause it 

to break.

This machine is not a toy:

• Your close attention is necessary 

when the machine is used by or near 

children.

• The plastic bag that this machine was 

supplied in should be kept out of the 

reach of children or disposed of. 

Never allow children to play with the 

bag due to the danger of suffocation.

• Do not use outdoors.

For a longer service life:

• When storing this machine, avoid 

direct sunlight and high humidity 

locations. Do not use or store the 

machine near a space heater, iron, 

halogen lamp, or other hot objects.

• Use only neutral soaps or detergents 

to clean the case. Benzene, thinner, 

and scouring powders can damage 

the case and machine, and should 

never be used.

• Always consult the operation manual 

when replacing or installing any 

assemblies, the presser feet, needle, 

or other parts to assure correct 

installation.

For repair or adjustment:

• If the light unit (light-emitting diode) 

is damaged, it must be replaced by 

authorized Brother Service Center.

• In the event a malfunction occurs or 

adjustment is required, first follow the 

troubleshooting table in the back of 

the operation manual to inspect and 

adjust the machine yourself. If the 

problem persists, please consult your 

local authorized Brother Service 

Center.