Руководство По Работе для Brother SE1800
Preparing the Fabric 155
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Tighten the adjustment screw by hand just
enough to secure the fabric.
enough to secure the fabric.
e
Gently remove the fabric from the frame
without loosening the adjustment screw.
without loosening the adjustment screw.
Memo
z This precautionary step will help reduce
pattern distortion while embroidering.
f
Press the inner frame in from the top of the
fabric again, lining up
fabric again, lining up
on the inner frame
and
on outer frame.
a Outer frame
b Inner frame
c Fabric (right
b Inner frame
c Fabric (right
side
)
d Stabilizer material
e Ledge of outer frame
e Ledge of outer frame
• Press down firmly until the inner frame is
securely pressed against the ledge of the
outer frame.
outer frame.
g
Tighten the adjustment screw while removing
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
■ Using embroidery sheets
If the embroidery sheet attached to the
embroidery frame is used, the embroidery can be
sewn in exactly the right position on the fabric.
embroidery frame is used, the embroidery can be
sewn in exactly the right position on the fabric.
a
Make a mark with a chalk pen at the center of
the position for the pattern to be embroidered.
the position for the pattern to be embroidered.
a Embroidery pattern
b Mark
b Mark
3
4
5
2
1
2
1