Руководство По Работе для Brother SB8000
Zipper/piping Insertion 101
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Zipper/piping Insertion
A zipper and piping can be sewn in place.
There are many methods for inserting zippers and pipings. The procedures for inserting a centered zipper
and a piping are described below, with the adjustable zipper/piping foot.
and a piping are described below, with the adjustable zipper/piping foot.
Inserting a centered zipper
a
Refer to step
a
–
e
of “Inserting a centered
zipper” (page 96).
b
Remove the presser foot and presser foot
holder (page 46) to attach the screw-on
adjustable zipper/piping foot.
holder (page 46) to attach the screw-on
adjustable zipper/piping foot.
Note
z Use a screw driver to securely tighten the
screw that holds the presser foot. If the screw
is loose, the needle may break and cause
injures.
is loose, the needle may break and cause
injures.
c
Select stitch
1
.
d
Loosen the positioning screw on the back of
the presser foot.
the presser foot.
a Positioning screw
e
Slide the presser foot over either the left or
right feed dog.
right feed dog.
f
Change the needle position so that the needle
does not touch the presser foot.
For details, refer to “Adjusting the stitch width”
(page 58).
does not touch the presser foot.
For details, refer to “Adjusting the stitch width”
(page 58).
a Needle drop point
Stitch Name
Pattern
Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Presser
Foot
Auto
Manual
Auto
Manual
Straight stitch
(left needle
position)
1
Attaching zippers Sewing
concealed seams and piping
concealed seams and piping
0.0
(0)
0.0–7.0
(0–1/4)
2.5
(3/32)
0.2–5.0
(1/64–3/16)
1
Left sewing position
Right sewing position
1