Руководство По Работе для Brother SB8000
Appliqué, Patchwork and Quilt Stitching 109
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Quilting
Sandwiching batting between the top and bottom layers
of fabric is called “quilting”. Quilts can easily be sewn
using the optional walking foot and the optional
quilting guide.
of fabric is called “quilting”. Quilts can easily be sewn
using the optional walking foot and the optional
quilting guide.
Note
z Thread the needle manually when using the
walking foot, or only attach the walking foot
after threading the needle using the needle
threader.
after threading the needle using the needle
threader.
z When sewing with the walking foot, sew at a
speed between slow and medium.
z When quilting, use a 90/14 home sewing
machine needle.
z The walking foot can only be used with
straight or zigzag stitch patterns. Reverse
stitches cannot be sewn with the walking
foot. Only select straight or zigzag stitch
patterns with reinforcement stitches. For
details, refer to “Stitch Setting Chart” (page
70).
stitches cannot be sewn with the walking
foot. Only select straight or zigzag stitch
patterns with reinforcement stitches. For
details, refer to “Stitch Setting Chart” (page
70).
a
Baste the fabric to be quilted.
b
Remove the presser foot and the presser foot
holder.
holder.
• For details, refer to “Removing and attaching
the presser foot holder” (page 46).
c
Hook the connecting fork of the walking foot
onto the needle clamp screw.
onto the needle clamp screw.
a Connecting fork
b Needle clamp screw
b Needle clamp screw
d
Lower the presser foot lever, insert the presser
foot holder screw, and then tighten the screw
with the screwdriver.
foot holder screw, and then tighten the screw
with the screwdriver.
a Presser foot holder screw
X
The walking foot is attached.
CAUTION
e
Select a stitch.
• For details, refer to “Selecting stitching” (page
51).
f
Place one hand on each side of the presser
foot, and hold fabric taut while sewing.
foot, and hold fabric taut while sewing.
a
b
● Be sure to securely tighten the screws
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
needle may touch the presser foot,
causing it to bend or break.
● Before starting to sew, slowly turn the
handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
a