Руководство По Работе для Brother SB8000
Care and Maintenance 185
5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
Grasp the bobbin case, and then pull it out.
a Bobbin case
f
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
remove any lint and dust from the race and its
surrounding area.
a Cleaning brush
b Race
b Race
• Do not apply oil to the
bobbin case
.
g
Insert the bobbin case so that the S mark on
the bobbin case aligns with the z mark on the
machine.
the bobbin case aligns with the z mark on the
machine.
• Align the S and z marks.
a
S mark
b
z mark
c Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
h
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
the needle plate, and then slide the cover back
on.
a Needle plate cover
CAUTION
1
a
b
a
b
b
a
● Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XC3153-321
(green marking), XC8167-551(no color on
the screw)), contact your nearest
authorized service center.
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XC3153-321
(green marking), XC8167-551(no color on
the screw)), contact your nearest
authorized service center.
● Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a