Руководство По Работе для Brother SB8000
Upper Threading 37
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
g
Thread the upper thread for the right side in the
same way that the upper thread for the left side
was threaded.
same way that the upper thread for the left side
was threaded.
a Thread guide cover
• For details, refer to steps
h
through
j
of
“Threading the upper thread” (page 33).
h
Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
with the twin needle, the sewing machine
may be damaged.
i
Attach zigzag foot “J”.
• For details on changing the presser foot, refer
to “Replacing the Presser Foot” (page 44).
CAUTION
j
Turn on the sewing machine and select a stitch.
• For stitch selection see “Selecting stitching”
(page 51).
• See “Stitch Setting Chart” (page 70) for
stitches that use a twin needle.
Note
z When using the pintuck foot (sold
separately) to sew straight pintucks with the
twin needle, select the stitch with the center
needle position.
twin needle, select the stitch with the center
needle position.
CAUTION
k
Press .
X
The screen for setting the twin needle
appears.
appears.
● When using the twin needle, be sure to
attach zigzag foot “J”. If bunched stitches
occur, use presser foot “N” or attach
stabilizer material.
occur, use presser foot “N” or attach
stabilizer material.
● When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
needle may break or the machine may be
damaged.
● After adjusting the stitch width, slowly
turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.