Руководство По Работе для Brother SB8000
2
Useful Functions 61
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Useful Functions
Functions useful in improving sewing efficiency are described below.
Automatically sewing reverse/
reinforcement stitches
reinforcement stitches
The sewing machine can be set to automatically sew
reverse or reinforcement stitches at the beginning and
end of the stitching. Whether reverse stitches or
reinforcement stitches are sewn depends on the stitch
that is selected. For details, refer to “Stitch Setting
Chart” (page 70).
reverse or reinforcement stitches at the beginning and
end of the stitching. Whether reverse stitches or
reinforcement stitches are sewn depends on the stitch
that is selected. For details, refer to “Stitch Setting
Chart” (page 70).
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
• For details on selecting a stitch, refer to
“Selecting stitching” (page 51).
c
Press
on the LCD.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
X
It turns to
, and the sewing machine is set
for automatic reverse/reinforcement stitching.
• To turn automatic reverse/reinforcement
stitching off, press
.
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
setting is cancelled.
d
Position the fabric under the presser foot, and
then press
then press
(“Start/Stop” button) once.
a “Start/Stop” button
X
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
sewn, the machine starts sewing.
e
After reaching the end of the stitching, press
(“Reverse/Reinforcement Stitch” button) once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
a “Reverse/Reinforcement Stitch” button
X
After reverse/reinforcement stitches are
sewn, the sewing machine stops.
sewn, the sewing machine stops.
Memo
z Reverse/reinforcement stitches WILL NOT
be sewn until
(“Reverse/Reinforcement
Stitch” button) is pressed.
(“Start/Stop”
button) may be pressed to stop stitching
when needed such as for pivoting corners.
when needed such as for pivoting corners.
1
1