Руководство По Работе для Brother SB4138
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
62
c
Press
(Automatic reverse/reinforcement
stitch key).
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
X
(Automatic reverse/reinforcement
stitch key) lights up, and the sewing machine
is set for automatic reverse/reinforcement
stitching.
• To turn automatic reverse/reinforcement
stitching off, press
(Automatic reverse/
reinforcement stitch key) until the key is no
longer lit.
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
setting is cancelled.
d
Position the fabric under the presser foot, and
then press
(“Start/Stop” button) once.
a “Start/Stop” button
X
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
sewn, the machine starts sewing.
e
After reaching the end of the stitching, press
(“Reverse/Reinforcement Stitch” button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
a “Reverse/Reinforcement Stitch” button
X
After reverse/reinforcement stitches are
sewn, the sewing machine stops.
sewn, the sewing machine stops.
Memo
z Reverse/reinforcement stitches WILL NOT
be sewn until
(“Reverse/Reinforcement
Stitch” button) is pressed.
(“Start/Stop”
button) may be pressed to stop stitching
when needed such as for pivoting corners.
when needed such as for pivoting corners.
1
1