Руководство По Работе для Brother NX 600
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
30
m
Press
(OK key).
X
The screen for selecting the twin needle
appears.
appears.
n
Press to select
.
To return to
, press
.
X
The twin needle can now be used.
o
Press
(OK key).
X
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
CAUTION
p
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
• For details on the stitches that can be sewn
with the twin needle, refer to "Stitch Settings"
(page 132).
(page 132).
CAUTION
q
Start sewing.
• For details on starting to sew, refer to
"Starting to sew" (page 48).
X
Two lines of stitching are sewn parallel to
each other.
each other.
CAUTION
● When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine may
be damaged.
the needle may break or the machine may
be damaged.
● When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
needle may break or the machine may be
damaged.
● When changing the sewing direction,
press
(Needle position button) to
raise the needle from the fabric, and then
raise the presser foot lever and turn the
fabric.
raise the presser foot lever and turn the
fabric.
F3dash-BrotherE_sgml.book Page 30 Friday, September 5, 2003 5:46 PM