Руководство По Работе для Brother NX 600
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
36
d
Hold the needle with your left hand, and then
use a screwdriver to turn the needle clamp
screw counterclockwise to remove the needle.
use a screwdriver to turn the needle clamp
screw counterclockwise to remove the needle.
a Screwdriver
b Needle clamp screw
b Needle clamp screw
• Do not apply a strong force when loosening
or tightening the needle clamp screw,
otherwise certain parts of the sewing
machine may be damaged.
otherwise certain parts of the sewing
machine may be damaged.
e
With the flat side of the needle toward the rear
of the machine, insert the needle until it
touches the needle stopper.
of the machine, insert the needle until it
touches the needle stopper.
f
While holding the needle with your left hand,
use the screwdriver to tighten the needle
clamp screw.
use the screwdriver to tighten the needle
clamp screw.
Install the twin needle in the same way.
CAUTION
2
1
● Be sure to insert the needle until it
touches the needle stopper and securely
tighten the needle clamp screw with the
screwdriver, otherwise the needle may
break or damage may result.
tighten the needle clamp screw with the
screwdriver, otherwise the needle may
break or damage may result.
F3dash-BrotherE_sgml.book Page 36 Friday, September 5, 2003 5:46 PM