Руководство По Работе для Brother NX 600

UTILITY STITCHES

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Overcasting Stitches

Sew overcasting stitches along the edges of cut fabric to prevent them from fraying. Fifteen stitches are
available for overcasting. The procedure for sewing overcasting stitch is explained according to the
presser foot that is used.

Sewing overcasting stitches using overcasting foot "G"

Three stitches can be used to sew overcasting with overcasting foot "G".

Attach overcasting foot "G".

• For details, refer to "Replacing the presser

foot" (page 37).

Select a stitch.

• For details, refer to "Selecting stitching" (page

66).

Position the fabric with the edge of the fabric
against the guide of the presser foot, and then
lower the presser foot lever.

a Guide

Sew with the edge of the fabric against the
presser foot guide.

a Needle drop point

CAUTION

Stitch Name Pattern

Stitch

Key

Application

Stitch Width
[mm (inch.)]

Stitch Length

[mm (inch.)]

Presser

Foot

Auto

Manual

Auto

Manual

Overcasting

stitch

Preventing fraying in
mediumweight and thin
fabrics

3.5

(1/8)

2.5–5.0

(3/32–3/16)

2.0

(1/16)

1.0–4.0

(1/16–3/16)

Preventing fraying in
thick fabrics and fabrics
that fray easily

5.0

(3/16)

2.5–5.0

(3/32–3/16)

2.5

(3/32)

1.0–4.0

(1/16–3/16)

–

5.0

(3/16)

3.5–5.0

(1/8–3/16)

2.5

(3/32)

1.0–4.0

(1/16–3/16)

● After adjusting the stitch width, slowly

turn the balance wheel toward you and
check that the needle does not touch the
presser foot. If the needle hits the presser
foot, the needle may bend or break.

F3dash-BrotherE_sgml.book Page 68 Friday, September 5, 2003 5:46 PM