Руководство По Работе для Brother NX 600
Blind Hem Stitching 75
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
a Stitch width
■ If the needle catches too much of the hem
fold
The needle is too far to the left.
Press (of the arrow keys) to decrease the
stitch width so that the needle slightly
catches the fold of the hem.
The needle is too far to the left.
Press (of the arrow keys) to decrease the
stitch width so that the needle slightly
catches the fold of the hem.
a Wrong side of fabric
b Right side of fabric
b Right side of fabric
■ If the needle does not catch the hem fold
The needle is too far to the right.
Press
Press
(of the arrow keys) to increase the
stitch width so that the needle slightly
catches the fold of the hem.
catches the fold of the hem.
a Wrong side of fabric
b Right side of fabric
b Right side of fabric
• For details on changing the stitch width, refer
to "Adjusting the Stitch Width and Length"
(page 55).
(page 55).
g
Sew with the fold of the hem against the
presser foot guide.
presser foot guide.
h
Remove the basting stitching.
a Wrong side of fabric
b Right side of fabric
b Right side of fabric
Memo
z For best results when sewing stretch fabrics,
decrease the pressure of the presser foot. For
details, refer to "Adjusting the pressure of the
presser foot" (page 39).
details, refer to "Adjusting the pressure of the
presser foot" (page 39).
1
–
+
1
2
1
2
1
2
F3dash-BrotherE_sgml.book Page 75 Friday, September 5, 2003 5:46 PM