Инструкция С Настройками для Brother NX-2000
6
a
Loosen the screw on the guide plate sliding
the plate to fit the width of the braid.
the plate to fit the width of the braid.
a Plate
b
Insert the braid through the guide before
attaching the foot onto the machine.
attaching the foot onto the machine.
c
Tighten the screw and pull the braid to the
back of the braiding foot.
back of the braiding foot.
d
Attach the foot onto the machine.
e
Select the desired stitch and sew in a circular
manner gently guiding the braid.
manner gently guiding the braid.
■ CORDING FOOT
You can embellish using 1 to 3 cords of decorative
threads or yarn.
a
Slip a cord from the right of the presser foot,
into each guide (to use single cord, use the
center guide).
into each guide (to use single cord, use the
center guide).
b
Place the cords under and to the back of the
cording foot.
cording foot.
c
Select a zigzag or decorative stitch and sew in
a circular manner gently guiding the cords.
a circular manner gently guiding the cords.
Note
• When sewing with zigzag or decorative stitches,
adjust the stitch width, so that it is slightly wider than
the width of the braid or cording.
the width of the braid or cording.