Руководство По Работе для Brother NX-2000
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
75
3
■ Free-motion Quilting
For free-motion quilting, use free-motion quilting
foot “C” and free-motion open toe quilting foot “O”
depending on the stitch that is selected, and set the
machine to free-motion sewing mode. In this mode,
the feed dogs are automatically lowered so the
fabric can be moved freely, and the presser foot is
raised to the necessary height for free-motion
sewing.
foot “C” and free-motion open toe quilting foot “O”
depending on the stitch that is selected, and set the
machine to free-motion sewing mode. In this mode,
the feed dogs are automatically lowered so the
fabric can be moved freely, and the presser foot is
raised to the necessary height for free-motion
sewing.
■ Free-motion Quilting Using Free-motion
Quilting Foot “C”
The free-motion quilting foot “C” is used for free-
motion sewing using a straight stitch. Be sure to
select a straight stitch with the middle (center)
motion sewing using a straight stitch. Be sure to
select a straight stitch with the middle (center)
needle position
or
.
Free-motion quilting foot “C”
a
Press
to lower the feed dogs and to set
the machine to free-motion sewing mode.
→ The feed dogs are lowered, and the quilting foot is
raised to the necessary height for free-motion
sewing.
sewing.
b
Select
or .
→ When stitch Q-01 or 1-30 is selected, free-motion
quilting foot “C” is indicated in the upper-left corner
of the screen.
of the screen.
c
Remove the presser foot holder (see page 72).
d
Attach free-motion foot “C” at the front with
the presser foot holder screw aligned with the
notch in the quilting foot.
the presser foot holder screw aligned with the
notch in the quilting foot.
a
Presser foot holder screw
b
Notch
e
Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
a
Presser foot holder screw
CAUTION
• With free-motion quilting, control the feeding speed
of the fabric to match the sewing speed. If the fabric
is moved faster than the sewing speed, the needle
may break or other damage may result.
is moved faster than the sewing speed, the needle
may break or other damage may result.
• When using free-motion quilting foot “C”, be sure to
select one of the patterns with a center needle
position (Q-01 or 1-30). Using any other stitch may
result in the needle striking the quilting foot, causing
damage or injuries.
position (Q-01 or 1-30). Using any other stitch may
result in the needle striking the quilting foot, causing
damage or injuries.
Memo
• When starting to sew, the internal sensor detects the
thickness of the fabric, and the quilting foot is raised
to the height specified in the machine settings
screen. Press
, and then press
or
to change the value beside “FREE MOTION
FOOT HEIGHT” on P. 2 of machine settings screen
(see page 20). Increase the height that the quilting
foot is raised, for example, when sewing puffy or
thick fabrics, decrease for better control of thin
fabrics.
• In order to sew with a balanced tension, it may be
necessary to adjust the upper thread tension (see
page 43). Test with a sample piece of quilting fabric.
Note
Make sure that the quilting foot is not slanted.
CAUTION
• Be sure to securely tighten the screws with the
screwdriver. Otherwise, the needle may touch the
quilting foot, causing it to bend or break.
quilting foot, causing it to bend or break.
a