Руководство По Работе для Brother PR655/PR655C

3

Various types of embroidery frames can be used with this machine to suit your project by changing the 
embroidery frame holders.

Two types of embroidery frame holders 
(embroidery frame holder A and embroidery frame 
holder B) are included with this machine.
Embroidery frame holder A is used with the four 
included embroidery frames. Embroidery frame 
holder B is used with the optional embroidery 
frames. In addition, if optional embroidery frame 
holder C is used, a frame from the optional round 
frame series can be installed. For details on which 
embroidery frame can be installed on each 
embroidery frame holder, refer to “Embroidery 
frame types and applications” listed in the 
Operation Manual.

1 Embroidery frame holder A
2 White corner covers
3 Embroidery frame holder B
4 Light gray corner covers
5 Magnet
6 Embroidery frame holder C (optional)
7 Dark gray corner covers

Depending on the position of the needle bars, it 
may be difficult to reach the embroidery frame. In 
that case, follow the procedure described below to 
move the embroidery frame.

1

X

The needle bar move screen appears.

2

X

The carriage automatically moves to a 
position where the embroidery frame can 
easily be reached/removed.

• Touch 

 to close the needle bar move 

screen and to move the carriage to the 
previous position.